PDF《SS-P》

Subminiature Basic Switch SS-P

103 Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept ? Insert molded base and improved case-to-base seal provides enhanced resistance to flux.

? Switch rating of

3 A at

125 VAC possible with a single-leaf movable spring. Models for micro loads with gold crossbar contact are also available. ? Solder, quick-connect terminals (#110), and PCB terminals are available, including even-pitched PCB terminals. ? RoHS Compliant. Ordering Information . Model Number Legend Terminals Solder terminals Quick-connect terminals (#110) PCB terminals Rating Actuator Uneven pitch Even pitch

3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB Hinge lever SS-3GLP SS-3GLPT SS-3GLPD SS-3GLPB Simulated roller lever SS-3GL13P SS-3GL13PT SS-3GL13PD SS-3GL13PB 0.1 A Pin plunger SS-01GP SS-01GPT SS-01GPD SS-01GPB Hinge lever SS-01GLP SS-01GLPT SS-01GLPD SS-01GLPB Simulated roller lever SS-01GL13P SS-01GL13PT SS-01GL13PD SS-01GL13PB SS- P 1. Ratings 3:

3 A at

125 VAC 01: 0.1 A at

30 VDC 2. Contact Gap G: 0.5 mm 3. Actuator None: Pin plunger L: Hinge lever L13: Simulated roller lever 4. Terminals None: Solder terminals T: Quick-connect terminals (#110) D: PCB terminals (Uneven pitch) B: PCB terminals (Even pitch)

3 4

2 1

104 Subminiature Basic Switch SS-P Specifications Characteristics Note: 1. The data given above are initial values. 2. The dielectric strength shown in the table indicates a value for models with a Separator. 3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values apply at the total travel position. Contact opening or closing time is within

1 ms. Ratings Note: The electrical rating applies under the following test conditions: Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency =

30 operations/minute Approved Standards UL Recognized (File No. E41515) CSA Certified (UL approval) EN61058-1 - - VDE approval (File No. 40008425) Testing conditions: 5E4 (50,000 operations), T55 (0°C to 55°C) Note: The rated values approved by each of the safety standards (e.g. UL, CSA) may be different from the performance charac- teristics individually defined in this catalog. Contact Specifications Note: Minimum applicable loads are indicated by N standard refer- ence values. This value represents the failure rate at a 60% (λ60) reliability level (JIS C5003). The equation λ60=0.5 x 10-6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability level of 60% Operating speed 0.1 mm to

1 m/s (for pin plunger models) Operating frequency Mechanical:

300 operations/min Electrical:

30 operations/min Insulation resistance

100 MΩ min. (at

500 VDC) Contact resistance SS-3P:

50 mΩ max. SS-01P:

100 mΩ max. Dielectric strength (See note 2) 1,000 VAC, 50/60 Hz for

1 min between terminals of the same polarities 1,500 VAC, 50/60 Hz for

1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Vibration resistance (See note 3) Malfunction:

10 to

55 Hz, 1.5-mm double amplitude Shock resistance (See note 3) Destruction: 1,000 m/s2 (approx.

100 G) max. Malfunction:

300 m/s2 (approx.

30 G) max. Degree of protection IEC IP40 Degree of protection against electrical shock Class I Proof tracking index (PTI)

175 Ambient operating temperature ?25°C to 85°C (at 60% RH max.) with no icing Ambient operating humidity 85% max. (for 5°C to 35°C) Life expectancy Mechanical: 1,000,000 operations min. (60 operations/min) Electrical: SS-3P: 70,000 operations min. (20 operations/min,