PDF《注意事项》

30 sec, and PLC will be switched from RUN to STOP. Remove DVPPCC01 from the PLC and plug it again to start the data transmission automatically. OK LED will be On when the transmission is done. Press the ERASE button before OK LED is On for

30 sec and the PLC will be switched from STOP to RUN again. ? Clearing Data in DVPPCC01 Plug DVPPCC01 into the COM port of the PLC and press the ERASE button before POWER LED is On for

5 sec. When OK LED is On, indicating the data clearing is finished, remove DVPPCC01 to complete the clearing process. ? Copying Data/Limit on the Number of Times Data Is Copied ? When DVPPCC01 writes data into the PLC, users can choose either to copy the program and parameters or simply copy the program by means of M1085, and can limit the number of times that the data is copied by means of M1480. Flag Status Function Flag Status Function M1085 On Copying the program M1480 On Enabling the function of limiting the number of times that the data is written into the PLC (M1480 needs to be used with D1088.) Off Copying the PLC parameters and the program Off Disabling the function of limiting the number of times that the data is written into the PLC ? How to set M1085 and M1480: 1. Users have to set M1085 in the PLC to On or O........