编辑: 会说话的鱼 2018-09-15
Warning EN ? DVPPCC01 is an OPEN-TYPE device.

It should be installed in a control cabinet free of airborne dust, humidity, electric shock and vibration. To prevent non-maintenance staff from operating DVPPCC01, or to prevent an accident from damaging DVPPCC01, the control cabinet in which DVPPCC01 is installed should be equipped with a safeguard. For example, the control cabinet in which DVPPCC01 is installed can be unlocked with a special tool or key. EN ? DO NOT connect AC power to any of I/O terminals, otherwise serious damage may occur. Please check all wiring again before DVPPCC01 is powered up. After DVPPCC01 is disconnected, Do NOT touch any terminals in a minute. Make sure that the ground terminal on DVPPCC01 is correctly grounded in order to prevent electromagnetic interference. FR ? DVPPCC01 est un module OUVERT. Il doit être installé que dans une enceinte protectrice (boitier, armoire, etc.) saine, dépourvue de poussière, d'

humidité, de vibrations et hors d'

atteinte des chocs électriques. La protection doit éviter que les personnes non habilitées à la maintenance puissent accéder à l'

appareil (par exemple, une clé ou un outil doivent être nécessaire pour ouvrir a protection).? FR ? Ne pas appliquer la tension secteur sur les bornes d'

entrées/Sorties, ou l'

appareil DVPPCC01 pourra être endommagé. Merci de vérifier encore une fois le c?blage avant la mise sous tension du DVPPCC01. Lors de la déconnection de l'

appareil, ne pas toucher les connecteurs dans la minute suivante. Vérifier que la terre est bien reliée au connecteur de terre afin d'

éviter toute interférence électromagnétique. ? Introduction DVPPCC01 supports the function of copying the program, parameters and passwords in DVP series PLC. DVPPCC01 reads or writes the program and parameters in the PLC through the COM port on the PLC. DVPPCC01 also supports the password function, the PLC ID function, and the subroutine password function to ensure safe data transmission. ? Supported PLC Models Firmware version ES/EX/SS SA/SX/SC EH/SV/EH2 ES2/EX2/SX2/SS2 SA2 EH3/SV2 MC DVPPCC01 v1.4 ? ? ? ? DVPPCC01 v1.6 ? ? ? ? ? ? DVPPCC01 v2.2 ? ? ? ? ? ? ? DVPPCC01 v2.22 ? ? ? ? ? Table

1 ? Supported PLC Models and Accessible Devices Device type Applicable series Program area PLC device area Program steps D register M device File register DVP-ES/EX/EC/SS 4k D0 ~ D599 M0 ~ M1279 None DVP-SA/SX/SC 8k D0 ~ D4999 M0 ~ M4095 1,600 DVP-SX V3.00 (and above) 16k D0 ~ D9999 M0 ~ M4095 1,600 DVP-SS2 8k D0 ~ D4999 M0 ~ M4095 None DVP-EH/SV/EH2-L/EH2 16k D0 ~ D9999 M0 ~ M4095 10,000 DVP-ES2/EX2/SX2/SA2/MC 16k D0 ~ D9999 M0 ~ M4095 None/5,000 (Note 1) DVP-EH3/EH3-L/SV2 30k D0 ~ D11999 M0 ~ M4095 10,000/50,000 (Note 2) Note 1: Only DVP-ES2/EX2 V2.8 (and above), DVP-SA2 V2.42 (and above), and DVP-SX2 V2.20 (and above) support file registers. Note 2: Only DVP-EH3/EH3-L V1.4 (and above), and DVP-SV2 V1.2 (and above) support 50,000 file registers. ? Product Profile P OW E R OK CO M ER AS E DVP-PCC

01 E RR

5 6

33 66.3

300 1

2 3

4 WR RD Unit: mm ? Power indicator ? Error LED ? Communication indicator ? Read (RD)/write (WR) switch ? Operation completion indicator ? Data erasing button ? Specifications Data retention

10 years Number of write-in times At least 10,000 times Transmission speed 9,600/115,200 bps (ES/EX/SS supports 9,600 bps only) ENGLISH Storage -25°C ~ 70°C (temperature),

5 ~ 95% (humidity) Operation 0°C ~ 55°C (temperature),

5 ~ 95% (humidity), pollution degree

2 Noise immunity ESD: ±4kV Air Discharge EFT: Power Line: 2kV CS: 0.15MHz ~ 80MHz, 10V/m Surge : ±1kV Vibration/shock resistance International standard: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 &

下载(注:源文件不在本站服务器,都将跳转到源网站下载)
备用下载
发帖评论
相关话题
发布一个新话题