PDF《AirVibe》

6 ? Do not use the appliance in a room or in a vehicle with major temperature changes, as this may cause condensation inside the appliance or inaccurate sensor reading. ? For residential use, place the appliance at least 2m away from electrical appliances that use airborne radio waves such as TVs, radios, and radio-controlled clocks to prevent interference. ? The appliance is only intended for household use under normal operating conditions. ? The adaptor only can be used for this appliance. ? Only use the adapter supplied. ? Inside laser component classi cation measurement according to GB7247.1-2012 (released on 2012-12-31). ? Inside laser component can'

t be touched or saw by consumer in normal use. LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT Max output 5mw, wavelength 650nm, continuous wave

7 2 Your AirVibe Congratulations on your purchase of Philips rst Wi-Fi connected air quality monitor. To fully bene t from the support that Philips o ers, register your product at www.Philips.com/support. Read this important information and user manual before you install and use the device. And save them for your future reference. Overview Display screen Power button Air inlet Cable- xing slot Formaldehyde module (AS1100, speci c type only) * Power in socket Power adapter Power cord * You can get additional accessories to get more functionality of your air quality monitor.

8 3 Getting started Air quality monitor is designed for monitoring your indoor air quality continuously, for instant data reading, make sure the power is always connected. It has a build-in battery, in case you would like to take your air quality monitor around to make quick measurements.

1 Connect the adapter into the power-in socket.

2 Connect the power plug to the power socket.

3 Press the power button to turn on AirVibe. To turn o AirVibe, press and hold the power button for

4 seconds. 4s

4 Download the free Ali Smart App from app stores. You can also download the app by scanning the below QR code.

5 Open the Ali Smart App and follow the on-screen instructions to nd your product from the category of air quality monitor. You can also nd your product by scanning the above QR code. Follow the on-screen steps to setup.

9 Sleep mode Press and hold t........