编辑: cyhzg 2015-05-20

3 VDE safety class III, protective extra-low voltage Protection class IP

67 Laser class 2M (according to EN 60825-1 and

21 CFR 1040.10 with Laser Notice No. 50) Standards applied IEC/EN 60947-5-2 Certifications UL 508, C22.2 No.14-13 4) 7) 7) These sensors shall be used with UL Listed Cable assemblies rated 30V, 0.5A min, in the field installation, or equivalent (categories: CYJV/CYJV7 or PVVA/PVVA7) X1 - logic and power X2 - Ethernet X3 - encoder Pin No. Signal Color Pin No. Signal Color Pin No. Signal Color

1 +24VDC WH

1 Tx+ YE

1 Enc. +24VDC WH

2 InAct (activation) BN

2 Rx+ WH

2 (GND) BN

3 GND GN

3 Tx- OR

3 GND GN

4 OutReady (ready) YE

4 Rx- BU

4 Enc. A+ YE

5 InTrig (trigger) GY 4-pin M12 socket, D coded

5 Enc. A- GY

6 OutCas (cascading) PK

6 Enc. B+ PK

7 Do not connect BU

7 Enc. B- BU

8 Do not connect RD

8 +5VDC Out RD 8-pin M12 plug, A coded 8-pin M12 socket, A coded Order guide Designation Part no. Line profile sensor With encoder interface LPS 36HI/EN

50111334 Tables LED State Display during measurement operation green continuous light Sensor ready off Sensor not ready yellow continuous light Ethernet connection established flashing Ethernet data transmission active off No Ethernet connection Diagrams A Measurement range B Line length

40 60

80 100

120 140

180 160

200 300

400 500

600 A B Line length/measurement range (ty- pical) Distance in mm Line length/measurement range in mm

0 0,1 0,2 0,3 0,4 0,5 0,8 0,9 0,6 0,7

200 300

400 500

600 X Z Resolution (typical) Distance in mm Resolution in mm LPS

36 HI Remarks ? Warmup time: After a warmup time of

30 min., the light section sen- sor has reached the operating temperature required for an optimum measurement. ? Encoder interface (LPS 36HI/EN): 24V single ended (A+, B+) or 5V differential (A+/A-, B+/B-) Current consumption max. 140mA, pulse frequency max. 300kHz. Operate in accordance with intended use! ? This product is not a safety sensor and is not intended as personnel protection. ? The product may only be put into operation by competent persons. ? Only use the product in accor- dance with the intended use. Leuze electronic GmbH + Co. KG In der Braike

1 D-73277 Owen Tel. +49 (0)

7021 573-0 LPS 36HI… -

04 [email protected] ? www.leuze.com Laser safety notices ATTENTION, LASER RADIATION C LASER CLASS 2M Never look directly into the beam or point the beam in the direction of telescope users! The device fulfills the EN 60825-1:2008-05 (IEC 60825-1:2007) safety regulations for a product in laser class 2M as well as the U.S.

21 CFR 1040.10 regulations with deviations corresponding to Laser Notice No.

50 from June 24th, 2007. ? Never look directly into the laser beam or in the direction of reflecting laser beams! If you look into the beam path over a longer time period, there is a risk of injury to the retina. ? Do not point the laser beam of the device at persons! ? Intercept the laser beam with an opaque, non-reflective object if the laser beam is accidentally directed towards a person. ? When mounting and aligning the device, avoid reflections of the laser beam off reflective surfaces! ? CAUTION! Use of controls or adjustments or performance of procedures other than spe........

下载(注:源文件不在本站服务器,都将跳转到源网站下载)
备用下载
发帖评论
相关话题
发布一个新话题