PDF《PART 45. FALL PROTECTION》

1 MIOSHA-STD-1326 (05/18)

42 Pages For further information Ph: 517-284-7740 www.

michigan.gov/mioshastandards DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'

S OFFICE CONSTRUCTION SAFETY STANDARDS Filed with the Secretary of State on September 3,

1996 (as amended April 6, 2015) These rules become effective immediately upon filing with the Secretary of State unless adopted under section 33, 44, or 45a(6) of

1969 PA 306. Rules adopted under these sections become effective

7 days after filing with the Secretary of State. (By authority conferred on the director of the department of licensing and regulatory affairs by sections

19 and

21 of

1974 PA 154, MCL 408.1019 and 408.1021, and Executive Reorganization Order Nos. 1996-2, 2003-1, 2008-4, and 2011-4, MCL 445.2001, 445.2011, 445.2025, and 445.2030) R 408.44501 and R 408.44502 of the Michigan Administrative Code are amended, as follows: CONSTRUCTION SAFETY AND HEALTH STANDARD PART 45. FALL PROTECTION Table of Contents: R 408.44501 Scope

1 R 408.44502 Adopted and referenced standards.2 OSHA FALL PROTECTION 1926.500 Scope, Application, and Definitions Applicable to this Subpart.4 1926.501 Duty to have Fall Protection.7 1926.502 Fall Protection Systems Criteria and Practices

9 1926.503 Training Requirements

16 Appendix A - Determining Roof Widths.17 Appendix B - Guardrail Systems

22 Appendix C - Personal Fall Arrest Systems

23 Appendix D - Positioning Device Systems

28 Appendix E - Sample Fall Protection Plan

29 R 408.44501 Scope Rule 4501. (1) The rules in this part set forth the minimum requirements and criteria for fall protection in construction workplaces, their applications, and definitions that are applicable to these rules. (2) These rules do not apply where an employee is making an inspection, an investigation, or an assessment of workplace conditions before the actual start of construction work or after all construction work has been completed. (3) The following provisions of the occupational safety and health administration (OSHA) regulations, except as amended in these rules, are adopted by reference in these rules: (a)

29 C.F.R. § 1926.500 Scope, Application, and definitions applicable to this subpart. (b)

29 C.F.R. § 1926.501 Duty to have fall protection. (c)

29 C.F.R. § 1926.502 Fall protection systems criteria and practices. (d)

29 C.F.R. § 1926.503 Training requirements. (4) All of the following provisions are amendments to the OSHA regulations adopted by reference in these rules and are referenced in R 408.44502: (a) Additional performance requirements for personal climbing equipment, lineman'

s body belts, safety straps, and lanyards are contained in Construction Safety Standard Part 16. Power Transmission and Distribution.

2 (b) The specifications for fall protection requirements for an employee working on certain types of derricks are contained in Construction Safety Standard Part 10. Lifting and Digging Equipment, and Construction Safety Standard Part 32. Aerial Work Platforms. (c) The specifications for fall protection requirements for an employee working on ladders and the performance requirements for stairways, stair rail systems, and handrails are contained in Construction Safety Standard Part 11. Fixed and Portable Ladders and Construction Safety Standard Part

21 Guarding of Walking and Working Areas. (d) The specifications for fall protection requirements for an employee working on a scaffold;

performance requirements for a guardrail system;

or for the performance requirements for falling object protection used on scaffolds are contained in Construction Safety Standard Part 12. Scaffolds and Scaffold Platforms. (e) The specifications for fall protection requirements for an employee working on or in certain types of equipment used in tunneling operations are contained in Construction Safety Standard Part 14. Tunnels, Shafts, Caissons, and Cofferdams. (f) The specifications for fall protection requirements for an employee working from aerial lifts, on poles, towers, or similar structures while engaged in the construction of electric transmission or distribution lines or equipment are contained in Construction Safety Standard Part 32. Aerial Work Platforms. (g) The specifications for fall protection requirements for an employee performing steel erection work on buildings are contained in Construction Safety Standard Part 26. Steel Erection. R 408.44502 Adopted and referenced standards. Rule 4502. (1) The following federal occupational safety and health administration (OSHA) regulations are adopted by reference in these rules: (a)