PDF《FJ-AP1》

FJ-AP1 ? OMRON Corporation All Rights Reserved.

*

2 1

9 2

0 8

9 -

9 A *

01 2

0 -

9 1

9 -

0 6

6 055-982-5015 055-977-6389 Development environment Application Producer for PC Vision System FJ series PRECAUTIONS FOR CORRECT USE PRECAUTIONS FOR SAFE USE Be sure to respect following items for safety. 1. Installation Site Do not install the product in locations subjected to the following conditions: ? Ambient temperature outside the rating ? Rapid temperature uctuations (causing condensation) ? Relative humidity outside the range of

35 to 85% ? Presence of corrosive or ammable gases ? Presence of dust, salt, or metallic particles ? Direct vibration or shock ? Re ection of intense light (such as other laser beams or electric arc-weldingmachines) ? Direct sunlight or near heaters ? Water, oil, or chemical fumes or spray ? Strong magnetic or electric eld ? Near high-voltage equipment or power equipment 2. Handling ? Keep the product away from infants. If the product is accidentally swallowed by an infant, it may cause suffocation. If swallowed, see a physician immediately. ? Never disassemble or tamper with the product. ? Do not bend, drop, damage or place heavy objects on the product. ? It the product becomes wet due to contact with water, chemicals, oil or other liquids, an accident may occur due to short-circuiting or electri cation. Do not use the product when wet. ? If you notice any abnormality in this product, stop using it immediately, turn OFF the power supply, and contact your OMRON sales representative. 3. Others ? When disposing the product, dispose it as industrial waste. (UNIT: mm) The red LED lamp turns ON when the PC recognizes the dongle. ? CD-ROM:

1 ? Dongle:

1 ? Instruction sheet (Japanese/English):

1 ? ? Member registration sheet:

1 Interface Operating current Operating temperature/humidity Storage temperature/humidity USB 2.0

50 mA maximum

0 to 50°C /

35 to 85% (No condensation)

25 to °C /

35 to 85% (No condensation) Weight 4.4 g Dimensions 40.2 mm (L) * 16.0 mm (W) * 8.0 mm (H) FOR DAMAGE/BREAKDOWN OR LOSS OF DONGLE SOFTWARE INSTALLATION GUIDE Observe the following precautions to prevent the product from malfunctioning, becoming inoperable, or the performance and/or the device from being adversely affected: ? Dongle is an electronic device. Do not subject it to static electricity. ? Keep foreign matter away from the connector of the dongle. Otherwise a failure may occur. ? Do not touch the terminal portion (connecting portion) of the dongle directly or allow it to come in contact with metals. Doing so may cause dongle data to be erased or destroyed by static electricity. ? Do not allow the dongle to be affected by vibration or impact while writing or reading data or remove it from the controller. Doing so may cause the dongle data to be destroyed. ? Do not use thinners, benzene, acetone, or kerosene. In the event of damage or failure, the dongle can be repaired for a fee. A replacement must be purchased when lost. Strictly manage and store the product. The dongle is used when the software is operated. WARNING PRECAUTIONS ON SAFETY CAUTION WARNING Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage. Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally there may be significant property damage. This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. INSTRUCTION SHEET Thank you for selecting OMRON product. This sheet pri- marily describes precautions required in installing and operating the product. Before operating the product, read the sheet thoroughly to acquire sufficient knowledge of the product. For your con- venience, keep the sheet at your disposal. Model FJ-AP1 ? OMRON Corporation