PDF《EA-PS 9000 1U 1500 W / 3000 W》

Irrtümer und ?nderungen vorbehalten / Subject to modification without notice, errors and omissions excepted ? EA-Elektro-Automatik GmbH, 2015, Last change: 13.

04.15 EA-PS 9080-100 1U EA-PS

9000 1U

1500 W /

3000 W 可编程实验室电源 / PROGRAMMABLE LABORATORY DC POWER SUPPLIES h h 多相输入100...264 V(针对1500W型号) h h 效率高达95% h h 输出功率有:0...1500 W至0...3000 W h h 输出电压:0...80 V 至0...750 V h h 输出电流:0...6 A 至0...100 A h h 灵活的功率调整输出 h h 各种保护功能 (OVP, OCP, OPP, OTP) h h 带按钮的控制面板与蓝色显示器,可显示实际值与设定 值、状态与报警 h h 远程感测端 h h 并联用共享总线 h h 隔离模拟接口 ? ? 通过 0...10 V或0...5 V电压可对U / I / P编程 ? ? 通过 0...10 V或0...5 V电压可监控U / I h h 高度仅1 U (44 mm) h h 温控风扇制冷 h h 内置USB与以太网端口 h h EMC符合EN 55022等级B标准 h h 支持SCPI指令语言 h h Wide input range 100...264 V (1500W models) h h High efficiency up to 95% h h Output power ratings: 0..1500 W or 0...3000 W h h Output voltages: 0...80 V up to 0...750 V h h Output currents: 0...6 A up to 0...100 A h h Flexible, power regulated output stage h h Various protection circuits (OVP, OCP, OPP, OTP) h h Control panel with pushbuttons and blue LCD for actual values, set values, status and alarms h h Remote sensing h h Share bus for support of parallel connection h h Galvanically isolated, analog interface with ? ? U / I / P programmable via 0...10 V or 0...5 V ? ? U / I monitoring via 0...10 V or 0...5 V h h Very low height of only

1 U (44 mm) h h Temperature controlled fans for cooling h h USB and Ethernet port integrated h h EMC according to EN

55022 Class B h h SCPI command language supported 概要 EA-PS

9000 1U系列是一款由微处理器控制,采用最新技术设 计的实验室电源.其标准型号配备多种功能和特征,让用户使 用起来更方便、有效.所有型号都安装于机器扁平外壳内,高 度仅44 mm. 控制面板上清晰地分布有两个旋钮,六个按钮,以及两个 LED 灯.同时还有一显示所有数值与状态的蓝色液晶显示器, 从而简化了产品的使用. AC 输入 本系列所有型号都采用主动式功率因数校正线路,1.5 kW以下 型号可在100 VAC至264 VAC的输入电压范围下使用. 当输入电压较低时,两个功率段会自动减少输出功率.因此在 100...150 VAC时1.5 kW型号仍能输出1 kW功率.3 kW型号在 输入电压180...207 VAC时仍能输出2.5 kW功率. General The microprocessor controlled laboratory power supplies of se- ries EA-PS

9000 1U offer many functions and features in their standard version, making the use of this equipment remarkably easy and most effective.All this comes in a flat design with only

44 mm of height. The clearly arranged control panel features two rotary knobs, six pushbuttons and two LEDs. Together with an illuminated, blue LC display for all values and status it simplifies the use of the device. AC input All units are provided with an active Power Factor Correction circuit and models up to 1.5 kW are even suitable for a world- wide operation on a supply from

100 VAC up to

264 VAC. Both power classes reduce the output power automatically when the input supply is low, so the 1.5 kW models can still provide

1 kW power with an input supply of 100...150 VAC and the

3 kW models can still provide 2.5 kW at 180...207 VAC. Irrtümer und ?nderungen vorbehalten / Subject to modification without notice, errors and omissions excepted ? EA-Elektro-Automatik GmbH, 2015, Last change: 13.04.15