PDF《PRODUCT SPECIFICATION》

Customer (客户名称) : Customer No.

(客户编号) : Product No. (产品编号): Comment 意见: Approved by(确认人) ShenZhenShi YunTianGe S&

T CO .,LTD Tel:

138 23768287 Phone : +86

0755 81499055 Fax : +86

0755 81499010 Email : wangxian8838@126.com 地址: 深圳市宝安区沙井镇和一鸿江工业园2栋5楼 深圳市运天戈科技有限公司 ShenZhenShi YunTianGe S&

T CO .,LTD PRODUCT SPECIFICATION 深圳市运天戈科技有限公司 YTG-P10025-C1F1 Customer Approval 客户批准 Accept 接收 Reject 拒绝 ShenZhenShi YunTianGe S&

TCO .,LTD CHECKED(审核) APPROVED(批准) PREPARED(制作) Date 日期 Ver.版本 Page 页码 Design by 变更人 2013/9/24 A0 - 深圳市运天戈科技有限公司 ShenZhenShi YunTianGe S&

T CO .,LTD History of Version 变更记录 Description 描述 - New Issue NO PART OF THIS SPECIFICATION MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN PERMISSION OF YTG. NOTICE: nondisclosure agreement, and may be used or copied only in accordance with the terms of such agreement. YTG products are not intended for use in life support appliances, devices, or systems. Use of YTG product in such applications is not supported and is prohibited. or other inaccuracies in the information or material contained in this specification. YTG shall not be liable for direct, indirect, special incidental, or consequential damages 深圳市运天戈科技有限公司 ShenZhenShi YunTianGe S&

T CO .,LTD The content of this specification is subject to change without further notice.YTG assumes no responsibility concerning the accuracy, adequacy, or completeness of this arising from the use of such information or material. The software (if any) described in this specification is furnished under a license or specification. YTG makes no commitment to update, or to keep current the information and material contained in this specification. Such information and material may change to conform to each confirmed order. In no event shall YTG be made responsible for any claims attributed to errors, omissions, Contents 目录 1. General Specification 产品规格 2. Electrical Characteristics 电气参数 3. Optical Characteristics 光学参数 4. Reliability 信赖性 5. Durability 寿命 6. Touch panel description 触摸屏功能描述 6.1 touch panel drawing 外形图 6.2 Block diagram 功能结构图 6.3 Touch panel pin assignment 引脚定义 7. Appearance Inspection 外观检验 7.1 Inspection Conditions 检验条件 7.2 Criteria 判定标准 8. Precautions 注意事项 9. Packing Drawing 包装说明 Appendix 附件 工程图 深圳市运天戈科技有限公司 ShenZhenShi YunTianGe S&

T CO .,LTD 1. General Specification 产品规格 mm mm mm inch 深圳市运天戈科技有限公司 CONTENTS 内容 Unit 单位 Item 项目 ShenZhenShi YunTianGe S&

T CO .,LTD TP size (inch) 英寸尺寸 - g - - ℃ ℃ - 1.1 Sensor thickness ITO 厚度 以确认工程图为准 222.72*125.28 223.72*126.28 10.1 Number of touchpoint 触点数量 Operation Temperature 工作温度 Storage Temperature 储存温度 View Area 可视区 Outline Dimension 外形尺寸 Active Area(W*L)动作区 IC Type IC 型号 - Interface Type 接口种类 黑色 - _ TOPL = -10, TOPH =60 TSTL = -20, TSTH =70 H mm mm Surface hardness 表面硬度 Input force 输入外力

3 Coverlens thickness 盖板厚度 Lens Color 盖板色 0.25 2. Electrical Characteristics (Ta=25℃) 电气参数 Item 项目 Symbol标识 Condition 条件 Min.最小 值Type典型 值Max.最大 值Unit 单位Power Supply 电压 VCC V IDD Vcc =3.3V Free mode mA Vcc =3.3V watch mode - - -- mA Vcc =3.3V Active mode - - -- mA Vcc =3.3V Fast mode - - - mA 3. Optical Characteristics 光学参数 4. Reliability 信赖性 深圳市运天戈科技有限公司 Supply Current 电流 Remark 备注 CONTENTS 内容 Item 项目 Thermal Shock 冷热冲击 Item 项目 Specifications 规格 Remark 备注 70?C,240hrs, Normalized for

2 hrs -20 ~ 70℃,

60 Mins/cycle , Total

10 Cycles, Normalized for

2 hrs ShenZhenShi YunTianGe S&

T CO .,LTD >

86% Transparency 透过率 60?C/90% RH,240hrs,normalized for

2 hrs 55?C,24hrs,Perform well High Temperature Storage 高温存储 Low Temperature Storage 低温存储 Temperature/ Humidity Storage储存温度/湿度 High Temperature Operation高温工作 Low Temperature Operation 低温工作 Temperature/ Humidity Storage储存温度/湿度 Non-condensing无 结露 Non-condensing无 结露 Non-condensing无 结露 Non-condensing无 结露 -10 ?C,24hrs,Perform well 60?C/90%RH,24hrs,Normalized for

2 hrs -20?C,240hrs, Normalized for

2 hrs 5. Durability 寿命 Item Hitting life 撞击寿命 Panel Slide Test 滑动测试 6. Touch panel description 触摸屏功能描述 6.1 touch panel drawing 外形图 See appendix(见附工程图) 6.2 Block diagram 功能方框图 深圳市运天戈科技有限公司 Hitting test may cause surface slight scratch yet the function stays intact 功能OK,外观轻微刮伤判OK Slide test may cause surface slight scratch yet the function stays intact功能OK,外观轻微刮伤判OK. Specification 35,000,000 times 250g, 20mm, 100,000 times Condition ShenZhenShi YunTianGe S&

T CO .,LTD 6.3 Touch panel pin assignment 引脚定义 Pin Symbol Pin Symbol Pin Symbol Pin Symbol Pin Symbol

1 NC

13 RX8

25 TX3

37 TX15

49 GND

2 NC

14 RX7

26 TX4

38 TX16

50 GND

3 NC

15 RX6

27 TX5

39 TX17

4 GND

16 RX5

28 TX6

40 TX18

5 RX16

17 RX4

29 TX7

41 TX19

6 RX15

18 RX3

30 TX8

42 TX20

7 RX14

19 RX2

31 TX9

43 TX21

8 RX13

20 RX1

32 TX10

44 TX22

9 RX12

21 GND

33 TX11

45 TX23

10 RX11

22 GND

34 TX12

46 TX24

11 RX10

23 TX1

35 TX13

47 TX25

12 RX9

24 TX2

36 TX14

48 TX26 7. Appearance Inspection 外观检验 7.1 Inspectio........