PDF《Lead Circulator》

SPECIFICATION SHEET SKYFR-001389: 2110―2170 MHz Single Junc?on Robust Lead Circulator Skyworks Solutions, Inc.

? Phone [781] 376-3000 ? Fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com Revision

1 ? Skyworks Proprietary Information ? Products and Product Information are Subject to Change Without Notice ? December

2015 1 Applica?ons ? Wireless infrastructure ? Power ampli?ers Features ? Small surface mount package ? Opera?ng frequency range:

2110 to

2170 MHz ? BeO free ? RoHS compliant ? Tape & Reel

1 2

3 CW Figure 1. Block Diagram Parameter Symbol Test Condition Min Max Units Average power PAVG

20 W Peak power PPK

100 W Operating temperature range TOP -40 +125 °C Storage temperature range TSTOR -55 +125 °C Table 1. Absolute Maximum Ratings Note: Exceeding any of the limits listed here may result in permanent damage to the device or may reduce device reliability. SPECIFICATION SHEET ? SKYFR-001389 Skyworks Solutions, Inc. ? Phone [781] 376-3000 ? Fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com Skyworks Proprietary Information ? Products and Product Information are Subject to Change Without Notice ? September

2015 2 Parameter Symbol Test Condition Min Typical Max Units Frequency range f

2110 2170 MHz Impedance

50 Insertion loss IL S21, S32, S13, -40°C to +125°C 0.15 0.25 dB Isolation ISO S12, S23, S31, -40°C to C10°C

18 21 dB Isolation ISO S12, S23, S31, -10°C to +125°C

20 22 dB Return loss RL S11, S22, S33, -40°C to C10°C

18 21 dB Return loss RL S11, S22, S33, -10°C to +125°C

20 22 dB Group delay 2.0 ns Intermodulation distortion (Note 2) IMD

2 x 5W CW tones, 1MHz spacing

55 65 dBc Table 2. Electrical Specifications (Note 1) Section Base Material Plating Pins Brass Silver Housing Steel Silver Table 3. Plating Specification Note 1: Performance is guaranteed under the conditions listed in this table and over the operating temperature range. Note 2: See Skyworks Application Note, Intermodulation Distortion Measurements of Ferrites, document number

201537 for further details. Note 3: Part tested on PCB-00077, 0.508mm Rogers RO4350B, trace width 1.07mm wide, 1oz copper. Manufacturing Part Number Evaluation Board Part Number SKYFR-001389 TFX-00118 Table 4. Ordering Information SPECIFICATION SHEET ? SKYFR-001389 Skyworks Solutions, Inc. ? Phone [781] 376-3000 ? Fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com Skyworks Proprietary Information ? Products and Product Information are Subject to Change Without Notice ? September

2015 3 Copyright ?

2011 Skyworks Solutions, Inc. All Rights Reserved. Information in the document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of any Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRIDGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT;