PDF《STE series 电流感测电阻规格书》

5 个冲击 a =100G , t =11ms,

5 times shock ±(1.0%+0.5mΩ) IEC60115-1 4.21 基板弯曲测试 / Substrate Bending 两支撑点间距 / Span between fulcrums :90mm ;

振幅 / Bend Width:2mm ;

测试板/Test board:玻璃纤维板/ Glass-Epoxy Board ;

厚度 / Thickness =1.6mm ±(1.0%+0.5mΩ) IEC60115-1 4.33 7. 环境特性 / ENVIRONMENTAL CHARACTERISTIC 7-1 操作温?围: -55℃~155℃ / Operating Temperature:-55℃~155℃ 额定功率温度衰变曲线 / Typical Thermal Derating Curve 额定功率乃指於

70 ?C 以内可连续满额功率使用的术语. 下图为当操作温度高於 70?C 时的可使用功率衰减曲线. Power rating is based on continuous full load operation at rated ambient temperature of

70 ?C. For resistors operated at ambient temp. in excess of

70 ?C, the max. load shall be derated in accordance with the following curve. STE series 电流感测电阻规格书 THE SPECIFICATION OF CURRENT SENSOR RESISTOR

001 版PAGE:7 OF

13 7-2 存储条件 / STORAGE CONDITIONS 在温度+10℃~40℃、相对湿度Q75%的密闭条件下可存放2年. / Under airtight in temperature+10℃~40℃、relative humidity Q75% can store

2 years. 在温度+10℃~60℃、相对湿度为95%的非露天下最多可存放30 天. / Without dew in temperature+10℃~60℃、relative humidity be 95% maximum value for 30days. 8. 焊锡垫尺寸及焊接条件 / SOLDER PAD SIZE AND WELDING CONDITIONS 8-1 建议如下图焊接方式焊接,并满足所要求的尺寸./ Propose that the following picture installation way is installed, and satisfied the required si........