PDF《LFC32/KL32》

181 181

180 7

17 60 LFC32 TTE

221 221

220 21

50 LFC32 TTE

271 271

270 6

28 LFC32 TTE

331 331

330 5

34 型号中放入电感允许偏差符号(J、K、M). The code for inductance tolerance(J, K, M)enters . LFC32和KL32的不同请参考电感值测定标准,前一页. Refer to『Inductance Measuring Standards (on the previous page)』for the difference between LFC32 and KL32. 性能 Performance 试验项目 Test Items 标准值 Performance Requirements Maximum ΔL/L Maximum ΔQ/Q 试验方法 Test Methods 保证值 Limit 代表值 Typical 耐焊接热 Resistance to soldering heat ΔL/L:±3% ΔL/L:±1.5% 260℃±5℃, 10s±1s 热冲击 Heat shock ΔL/L:±5% ΔL/L:±1.1% -25℃(1h)/+100℃(1h)100 cycles 低温放置 Low temperature exposure ΔL/L:±5%, ΔQ/Q:±20% ΔL/L:±0.9% ΔQ/Q:±5.0% -40℃±2℃, 1000h 高温放置 High temperature exposure ΔL/L:±5% ΔQ/Q:±30% ΔL/L:±0.8% ΔQ/Q:±5.0% 100℃±2℃, 1000h 耐湿性 Moisture endurance ΔL/L:±5%, ΔQ/Q:±30% ΔL/L:±1.3% ΔQ/Q:±5.2% 40℃±2℃, 90%~95%RH, 1000h 耐溶剂性 Resistance to solvent 没有表示消失等异常. No damage and marking shall remain legible. C MIL-STD-202F试验法215 Accordance with MIL-STD-202F Method

215 使用注意事项 Precautions for Use z 由于在电感器上施加强力、过度冲击后,电、磁特性会有变化,因此,在装载时和装载后,应不要施加过度的冲击. z Avoid strong pressure or excessive shock at mounting or after mounting because electric/magnetic characteristics may change if it is applied to the inductors. Mar. 2015