PDF《FJ-35》

FJ-35 FJ-35 -10

2011 *

2 1

7 4

4 1

7 -

9 C * ? OMRON Corporation All Rights Reserved.

FJ-35 FJ-35 -10 8.5mm max. 8.5mm max. This product contains a lithium battery for which the following notice applies :Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate Camera cable FZ-VS3 (2 m, 3m,

5 m,

10 m) Bend resistant camera cable FZ-VSB3 (2 m, 3m,

5 m,

10 m) Right-angle camera cable FZ-VSL3 (2 m, 3m,

5 m,

10 m) Bend resistant Right-angle camera cable FZ-VSLB3 (2 m, 3m,

5 m,

10 m) Long-distance camera cable FZ-VS4 (15m) Long-distance Right-angle camera cable FZ-VSL4 (15m) Standalone camera FZ-SC/FZ-S/ FZ-SC2M/FZ-S2M/ FZ-SC5M2/FZ-S5M2/ FZ-SFC/FZ-SF/ FZ-SPC/FZ-SP/ FZ-SHC/FZ-SH/ Intelligent compact camera FZ-SQ010F/FZ-SQ050F/ FZ-SQ100F/FZ-SQ100N * Camera 2ch type FJ-350 FJ-355 Camera 4ch type FJ-350-10 FJ-355-10 Controller Camera cable * LCD monitor Monitor cable * * Detects workpieces as images. Camera USB memory FZ-MEM2G/FZ-MEM8G Mouse, track ball (Commercially available USB devices) Recommended Model By OMRON Corporation S8VS-12024(FJ-35 ) S8VS-18024(FJ-35 -10) * Power Supply Peripheral Device Input Device * Power Supply Wiring 24VDC FJ-350/FJ-355/FJ-350-10/FJ-355-10 Lit while power is ON. Lit or turned off according to the layout under the display. Lit when an error has occurred. Connect the controller to external devices such as a sync sensor and PLC. Connect cameras. Connect a DC power supply. Wire the power supply unit independently of other devices. After wiring, replace the terminal cover. ? The following items can be connected to USB ports. ? Commercially available track ball, mause and USB memory. ? Never insert/remove USB devices during measurement. Doing so may affect measurement time. Connect a monitor. Connect an external device such as a personal computer or PLC. Connect an external device such as a personal computer or PLC. Connect a mouse and USB memory, etc. Two USB ports are provided and any of them can be used. However, when USB memory is connected with both ports, doing so may cause the USB memories to come into contact, resulting in malfunction or damage. POWER LED USB connector Monitor connector (analog RGB) Ethernet connector Camera connector Only Camera 4ch type (FJ-35 -10) RS-232C connector Power terminal I/O connector (control lines, data lines) RUN LED ERROR LED Model

2011 PC Vision System Meanings of Signal Words Meanings of Alert Symbols Alert statements in this Manual Precautions for Correct Use Precautions for Safe Use Manufacturer: Omron Corporation, Shiokoji Horikawa, Shimogyo-ku, Kyoto 600-8530 JAPAN TRACEABILITY INFORMATION: Importer in EU : Omron Europe B.V. Wegalaan 67-69

2132 JD Hoofddorp, The Netherlands WARNING CAUTION The following signal words are used in this manual. The following alert symbols are used in this manual. The following alert statements apply to the products in this manual. Each alert statement also appears at the locations needed in this manual to attract your attention. This product must be used according to the instruction manual. Failure to observe this may result in impairment of functions and performance of the product. This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. Never connect the AC power supply with this product. When the AC power supply is connected, it causes the electric shock and a fire. A lithium battery is built into the Controller and may occasionally combust, explode, or burn if not treated properly. Dispose of the Controller as industrial waste, and never disassemble, apply pressure that would deform, heat to