PDF《fact sheet》

Background on Scale Buildup Water is used in a wide range of commercial applications.

Every day, businesses and facilities heat water to serve the needs of their customers and patrons. While restaurants, laundromats, hotels and car washes all require very large amounts of hot water to stay in business, nearly all companies rely on hot water in one way or another. Each year, a significant portion of their overhead is allotted to the fuel required to heat water, and everyday that allotment becomes slightly larger. However, many do not realize what they lose each year due to the negative by-products of heating water. Water is often called the "universal solvent," because it dissolves most substances with which it comes in contact. Water contains dissolved minerals, such as calcium-carbonate (lime), magnesium, silica, iron and phosphate. The amount of these dissolved minerals in water varies throughout the country and from municipality to municipality. However,

85 percent of this country's area is served with water containing concentrations of dissolved minerals sufficient to form scale. When water is heated, it undergoes a chemical reaction that causes the dissolved minerals to "precipitate" out as solids. The amount of precipitant, or scale, is directly proportional to the volume of water used and its temperature. As the temperature of water increases, so does the rate of corrosion. Heated water releases the dissolved corrosive gases, such as oxygen and carbon dioxide, which increases the electrical conductivity of water. Lime Scale Accumulation: The Energy Thief Lochinvar? Helps SHIELD Commercial Water Heaters From Energy-Robbing Lime Scale Buildup Lime Scale Buildup In Brief: Product: SHIELD? Condensing Gas Water Heater Topic: Lime Scale Solutions for Commercial Water Heaters Topic Sections: ? Background on Scale Buildup ? Harmful Effects of Scale ? Solution for Lime Scale ? Smart Design, SMART CONTROLTM fact sheet Lochinvar Water Heating Solutions TM Harmful Effects of Scale Scaling and corrosion will inevitably cause efficiency losses, malfunctions and total equipment failure. It is responsible for millions of wasted dollars each year in maintenance cost and energy consumption. Since most commercial water heaters transfer heat inside the tank through flue tubes or coil-type heat exchangers, the scaling and corrosion wreaks havoc on them. Scale has a very low thermal conductivity. In fact, it acts as a better insulator than a conductor for heat transfer. The thermal conductivity of a typical lime/scale deposit measured in Btu/hr/ft?/in/?F ranges from three to seven. As a comparison, the thermal conductivity of copper is

2680 and steel is 460. It is easy to see that a heat transfer surface which has accumulated a scale build-up will have a less efficient heat transfer process. This means that the metal surface must be hotter for the same amount of heat to be passed through both the metal surface and scale accumulation then into the water. If enough scale is present, the metal overheats, causing distortion, embrittlement and eventual failure of the water heater. In fact, as little as one-fourth of an inch of lime scale on the heat exchanger can increase operating costs by

25 percent and cause tank failure in as little as two years. Solution for Lime Scale Designed to provide a

100 percent effective defense against the problem of lime Scale buildup, the new SHIELD? Water Heater, introduced by Lochinvar? in October 2008, is equipped with the industry's most advanced stainless steel heat transfer system located outside of the tank, ensuring the same high efficiency and low operating costs throughout its life cycle. With inputs up to 500,000 Btu/hr,