PDF《WARNING》

3D Display / 3D 显示器 Instruction Manual / 使用h明书 CECH-ZED1H / CECH-ZED1T GB WARNING To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only. Some people may experience discomfort (such as eye strain, eye fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games on 3D televisions. If you experience such discomfort you should immediately discontinue use of your television until the discomfort subsides. SCE recommends that all viewers take regular breaks while watching 3D video, or playing stereoscopic 3D games. The length and frequency of necessary breaks may vary from person to person C please take breaks that are long enough to allow any feelings of discomfort to subside. If symptoms persist, consult your physician. The vision of young children (especially those under six years old) is still under development. Consult with a physician (such as a pediatrician or eye doctor) before allowing a young child to watch 3D video images or play stereoscopic 3D games. When using any 3D enabled device with your PlayStation ?3 system you should read the instruction manual for that device. Precautions Before using this product, carefully read this manual and retain it for future reference. Read also the instructions for the PlayStation ?3 system. Safety Do not use a power cord other than the supplied AC power cord. Do not modify the cord. Do not allow liquid or small particles to get into the product. If this happens, stop use and disconnect it from the electrical outlet immediately. Never disassemble or modify the product. Do not expose the product to dust, smoke or steam. Do not expose the product to high temperatures, high humidity or direct sunlight. Do not touch the product with wet hands. Unplug the AC power cord from the electrical outlet before cleaning or when you do not intend to use the system for an extended period of time. Do not connect the AC power cord to a voltage transformer or inverter. Connecting the AC power cord to a voltage transformer for overseas travel or an inverter for use in an automobile may cause heat to build up in the system and may cause burns or a malfunction. Keep this product out of the reach of small children. Small children may swallow small parts or may wrap the cables around themselves, which may inflict injury or cause an accident or a malfunction. Use and handling The LCD screen is made of glass and may crack if subjected to excessive force. Pixels that are not lit or are continuously lit may appear in certain locations on the LCD screen. The appearance of such spots is a normal occurrence associated with LCD screens and is not a sign of a product malfunction. LCD screens are made using highly precise technology. However, a very small number of dark pixels or continuously lit pixels exist on each screen. Also, a distorted image may remain on the screen for several seconds after the product has been turned off. Direct exposure to sunlight may damage the product'

s LCD screen. Be careful when using the product outdoors or near a window. When using the product in a cold environment, you may notice shadows on the graphics or the screen may appear darker than usual. This is not a malfunction, and the screen will return to normal when the temperature goes up. Be careful when carrying the product. If you do not have a good grip, the product may drop causing potential damage or injury. Do not place the product on surfaces that are unstable, tilted or subject to vibration. Do not place any objects on top of the product. Do not stand on the product. Do not throw or drop the product, or otherwise expose it to strong physical impact. Do not allow the product to come into contact with liquids. Follow the instructions below to help prevent the product exterior from deteriorating or becoming discoloured. Wipe with a soft, dry cloth. Do not place any rubber or vinyl materials on the product exterior for an extended period of time. Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning cloth. Using the 3D display Front Status indicator Red: power off (standby mode) Blue: starting up Green: running Orange: no input signal 3D sync transmitter Infrared receiver Infrared receiver for the remote control (sold separately). Rear Power button Turns the power on and off (standby). Input selector button Switches between input signals. Volume + button/ volume C button MENU button Displays and hides the menu. 3D button Press the 3D button to display video images in 3D. AC IN connector Service connector Component video input connectors Audio input jacks HDMI? input connectors Headphone jack Checking the version of the PS3? system software To use the 3D display, the PS3? system software must be version 3.70 or later. You can check the system software version by selecting (Settings) (System Settings) [System Information] on the XMB ? (XrossMediaBar) menu of the PS3? system. Unpacking 3D display (1) Stand (1) Neck (1) AC power cord (1) HDMI cable (1) 3D glasses (1 set) (pouch, USB cable) Instruction manual (1) Assembly

1 Insert the neck into the stand until you hear a click. Check that the neck and stand face in the same direction, as shown in the illustration.

2 Securely anchor the neck in place by tightening the mounting screw on the bottom of the stand.

3 Insert the display into the neck until you hear a click. Hints Be careful not to pinch your hands or fingers when you assemble the stand and display. You can adjust the tilt angle of the display by up to 10° from the vertical. Hold the stand down with one hand and move the upper part of the display with your other hand. Do not try to tilt the display any further than 10° from the vertical, since this may damage it. At least two people must perform the steps for removing the display from the neck and stand. One person must hold the neck and stand securely on a flat surface and press the button on the hinge. At the same time, another person can lift the display upwards. Rear Press to detach display from neck and stand. 3D glasses BATTERY switch When you start using the 3D glasses, be sure to put the BATTERY switch in the On position. Nose pad You can adjust the nose pad to fit the shape of your nose. Infrared receiver Power button Power on/off: press and hold for at least

2 seconds. Switching players when using SimulView?: with the power on, press and release quickly. Power indicator Flashes: 3D mode Fl........