PDF《RSS》

3757 W.

Touhy Ave., Lincolnwood, IL

60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com

46 ? For all general purpose applications I Suitable for dipped tantalum replacement I Small case sizes I Capacitance range:

1 ?F to2200 ?F I Voltage range: 6.3 WVDC to

50 WVDC I Solvent tolerant end seals standard FEATURES RSS Operating Temperature Range SPECIFICATIONS Capacitance Tolerance -40°C to +85°C ±20%at

120 Hz, 20°C Shelf Life

500 hours at +85°C with no voltage applied. Units will meet load life specifications Load Life 1,000 hours, +85°C, with rated voltage 6.3

10 16

25 35

50 .25 .2 .17 .15 .12 .10 Dissipation Factor 120Hz, 20°C tan δ WVDC Impedance Ratio (Max.) @120Hz -25°C/20°C -40°C/20°C

5 4

3 2

2 2

10 8

6 4

4 4 WVDC 6.3

10 16

25 35

50 2 minutes Leakage Current .01 CV or

3 ?A whichever is greater Time ≤50WVDC WVDC ≤ 20% of initial measured value ≤ 200% of initial specified value ≤ initial specified value Capacitance change Dissipation factor Leakage current +85°C Low Profile Radial Lead Aluminum Electrolytic Capacitors SPECIAL ORDER OPTIONS ? Special tolerances: ±10% (K), -10% + 30% (Q) ? Tape and Reel/Ammo-Pack ? Cut, Formed, Cut and Formed, and Snap In Leads (See pages

33 thru 37) Ripple Current Multipliers Frequency (Hz)

50 120

400 1K 10K 100K 0.8 1.0 1.3 1.45 1.65 1.7 Temperature (°C) +85 1.0 +70 1.3 +60 1.5 +30 1.8

3757 W. Touhy Ave., Lincolnwood, IL

60712 ? (847) 675-1760 ? Fax (847) 673-2850 ? www.illcap.com

47 ? PART NUMBER WVDC Maximum ESR ? 120Hz,+20°C Capacitance (?F) Maximum RMS Ripple Current (mA) 120Hz,+85°C 1.0

50 105RSS050M 165.786

10 4x7 2.2

50 225RSS050M 75.357

20 4x7 3.3

50 335RSS050M 50.238

25 4x7 4.7

35 475RSS035M 42.328

25 4x7 4.7

50 475RSS050M 35.274

30 5x7

10 16 106RSS016M 28.184

40 4x7

10 35 106RSS035M 19.894

45 5x7

10 50 106RSS050M 16.579

50 6.3x7

22 16 226RSS016M 12.811

45 5x7

22 35 226RSS035M 9.043

70 6.3x7

33 10 336RSS010M 10.048

50 5x7

33 25 336RSS025M 7.536

70 6.3x7 PART NUMBER WVDC Maximum ESR ? 120Hz,+20°C Capacitance (?F) Maximum RMS Ripple Current (mA) 120Hz,+85°C

47 6.3 476RSS6R3M 7.055

80 5x7

47 16 476RSS016M 5.997

80 6.3x7

100 6.3 107RSS6R3M 4.145

90 6.3x7

100 25 107RSS025M 2.487

135 8x9

100 35 107RSS035M 1.989

160 10x9

220 10 227RSS010M 1.507

165 8x9

220 16 227RSS016M 1.281

202 10x9

470 6.3 477RSS6R3M 0.882

238 10x9

470 35 477RSS035M 0.423

524 12.5x15

1000 16 108RSS016M 0.282

655 12.5x15

1000 35 108RSS035M 0.199

1000 16x15

2200 16 228RSS016M 0.153

940 16x15 4x7 4x7 4x7 4x7 5x7 4x7 5x7 6.3x7 5x7 6.3x7 5x7 6.3x7 5x7 6.3x7 6.3x7 8x9 10x9 8x9 10x9 10x9 12.5x15 12.5x15 16x15 16x15 D 4.0 5.0 6.3

8 10 12.5

16 S 1.5 2.0 2.5 3.5 5.0 5.0 7.5 d 0.45 0.45 0.45 0.6 0.6 0.6 0.8 B 0.5 0.5 0.5 0.5 0.5 0.8 0.5

10 (13) 6.3 (8)

16 (20)

25 (32)

35 (44)

50 (63) 1.0 2.2 3.3 4.7

10 22

33 47

100 220

470 1000

2200 L - + PVC SLEEVE d S1 D1 L1 L L L L L L L L L 19.0 MIN L L 15.0 MIN LEAD INFORMATION V.S. CASE DIAMETER L1=L+1.0 mm Max. D≤8 mm L1=L+1.5 mm Max. D≥10 mm D1=D+B Max. S1=S±0.5mm Convert to inches, divide by 25.4 NOTE: Case Vent is standard on all diameter ≥8.0mm DxL(mm) PHYSICAL DIMENSIONS RSS STANDARD PART LISTING + 85°C Low Profile Radial Lead Aluminum Electrolytic Capacitors Dimensions DxL (mm) Dimensions DxL (mm) WVDC (SV) (?F) L Aluminum Electrolytic