PDF《Z CAM E2》

Z CAM E2 Firmware 0.

84 Release Notes z-cam.com Added: Apple ProRes Proxy/ProRes LT/ProRes 422/ProRes

422 HQ. Added: Supports H.264 proxy ?le while recording ProRes. Turn on this proxy option in order to playback after ProRes recording but note that it requires more CFAST/SSD bandwidth. Added: Center Mark & Frame Line. Added: 4K/C4K Low Noise Resolution 4K/C4K Low Noise mode results in better noise performance and DR. Jello e ect is reduced in normal 4K/C4K 30/25/24 fps mode. Added: Magnify the HDMI preview while recording. Added: Individual image settings (luminance level, sharpness...etc) for Z-Log2/Rec709/FLAT respectively. Added: External LTC module support. Hardware will be available soon. Updated: Optimized the writing speed of CFAST/SSD. Updated: High bitrate for 4K/C4K 120fps is raised to 300Mbps. Updated: [GUI] Movie Format is renamed to Resolution & Project FPS. Updated: [GUI] Moved Video System item to Record menu. Updated: [GUI] Moved Flicker Reduction item to Exposure menu. Updated: LANC command supports AF and playback. Fixed: Greenish color under Z-Log2 in certain low light environments. Fixed: WDR C4K image artifact. Fixed: ISO

640 bad noise performance under Z-Log2. Fixed: Timelapse interval > 1s under 50/60 fps wasn't working. Fixed: Other minor bug ?xes. Notes: ? After installation of this 0.84 ?rmware, Z CAM E2 CANNOT be rolled back to previous ?rmware version. ? To get better writing performance, the CFAST/SSD must be formatted in Z CAM E2. ? Luminance Level must be set to Limited for ProRes recording. 新增功能: ? 4K 2.4:1(3840x1620)@160fps(最高可变帧率) ? C4K 2.4:1(4096x1728)@150fps(最高可变帧率) ? 2704x1600 分辨率(S16 模式) ? HLG 图像配置 ? 元数据设置,可定义卷名和相机编号 ? 手动白平衡模式下快速设置(注1) ? 录影功能可设置为 F1/F2/F3 功能键或电源按键(短按) ? 长按菜单键返回菜单主界面 ? 最长曝光时间可达

1 秒(仅在可变帧率模式下,注2) ? 可在录制期间启用/禁用图像放大功能 ? 音频输入通道选项:XLR 左声道+麦克风右声道,XLR 右声道+麦克风左声道 改进及优化: ? 1920x1080 @200/240fps,H.265 编码的颜色位深提升至

10 比特(原为

8 比特) ? ISO 数值定义更新,双原生 ISO 由160/800 变更为 500/2500(注3) ? HDMI 输出显示增加更多信息,包括分辨率,帧率,可变帧率,编码格式,音频柱等 ? 优化音频增益 ? 移除"视频制式"选项,可直接选择录影帧率 ? 电量显示由格数(百分比)改为电压数值 ? 提高多机同步录制稳定性 ? 优化辅助工具显示,包括中心标记、框线、波形图、矢量图 ? 配置管理: ? 保存配置:将当前设置保存为配置(存储于相机内) ? 加载配置:选择已保存的配置,应用到相机设置 ? 保存配置到卡:将当前设置导出为配置文件,保存在存储卡(位置 MISC/profile) ? 从卡中加载配置:从存储卡中导入配置文件,应用到相机设置 ? 导出的配置文件可重新命名(仅支持英文字母,后缀.prf) ? "加载配置"功能可定义为任一功能按键,默认是 F2 ? 其他问题修复 注: 1. 在"白平衡"设置为"手动"且将某个功能键(如F1)设置为"白平衡" (系统-用户按钮)时,长按 F1 键,相机会根据当前场景设置合适的白平衡数值 2. 例如将可变帧率设置为 1,则可设置最长的曝光时间为

1 秒3. 仅数值更改,不影响双原生 ISO 的效果,宽动态模式下双原生 ISO 数值为 250/1250 z-cam.com 0.86 版本固件更新说明